Tips

HomeTips

TIPS

Please use dry cleaning fort he jackets, coats, topcoats and suits. The dirty clothes shouldn’t be kept in closed and airless environments. Keep them in dry and well-ventilated places until they are cleaned. For the washable products, don’t forget tor everse them, unbutton, zip before washing. Do not overload your washing machine. Oterwise the products are not cleaned well and will pale in time, lose their colors and be deformed. Do not wear them for a long time in rain, warm and in environments where you have to be very animated. The texture of the pure fabrics like 100% wool or linen might be damaged by warmth and environments which demand activity. The products should be kept on a cloth hanger after each use. Do not enfold them this may cause the interlining to be wrecked.Keep them in their case if it’s possible. You should contact our sales advisors to get information for the products without the using instructions.Product care and use

WASHING

The products should be dry and aired before the wash. The pockets should be emptied: the collars should be on the upright position during the washing process. Be cereful about the temperature stated on the label. Choose aproper detergent (proper to white/colored products) for the product material and color to make it last longer. Some detergents like chlorine water damage the fiber of the fabric therefore prefer the bleaches.-Don’t use spin dry for improper products
 

DRY CLEANING

Don’t use any chemicals in dry cleaning unless it’s indicated in the using instructions. The high temperature which might be used in dry cleaning will damage the interlining and thus the look of the clothes. The clothes like coat, topper and jacket shouldn’t be washed by water. The only appropriate way is dry cleaning.

IRONING

The products should be ironed according to the temperatures indicated in the labels. Higher temperatures could result deformations like shining, fading or wearing. The products should be kept slightly moist and ironed from the back side if there is a warning. Don’t iron the products having a warning on the label.

DRYING

Enfold the product provinding that it keeps its form. Put it on a dry base or on a towel to make dry. Don’t dry them by putting on a heater or to direct sun light.

BLEACH

Use only cold water and don’t apply bleach (only for products suitable to bleach) for more than one hour. The products to be cleaned with bleach shouldn’t have any copper, brass and leather accessories.Care suggestions according to the product groups

GROUP OF WOOL

We suggest using only dry cleaning fort he wool group. The washable products should be washed delicately without squeezing and be dried by putting on a flat base. High temperatures may cause shrinkages. The fabrics with a special finish or weave and the knitted products could be washed in the machine or by hand only if it’s stated in the using instructions. The wool suits, jackets and trousers should be definitely dry cleaned.-Don’t wear them very frequently and for long hours. Let them rest in order to make pull upright. The dust and dirt colleected in the collars and cuffs should be always cleaned by a brush. Keep the wool products in their own cover after having cleaned them. Use medicines in the places where you keep your wools to prevent moth.-If your wool cloth gets wet don’t put it next to a heater or stove and don’t leave it to direct sun light. Don’t dry your wool cloth in a drying machine. Put it on a flat base to be dried with the room temperature.Don’t wear them in warm weathers because the perspiration acid and the humidity will have a negative effect on the fabrics. Fledging and deformation might happen resulting from the excessive rubbing due to the body shapeof the user. It’s natural that the wool fabric fledges due to the excessive rubbing. Local fledging is normal in tricots. The tricots carrying wool for more tahn 50% will normally fledge in axillas, belly and collars after the use. The rubbing will be lesser if you follow the cleaning instructions of the tricot, pay attention to the temperature of the water while washing and rest it properly. The plackets of the trousers and the inner pockets of the jackets might be damaged due to the use. Some tears emanate from misusage. The reasons are listed below: The permanent use of the trouser pockets due to the personal habits. To carry permanently a sizeable wallet in the hip pocket of the trouser or iner pocket of the jacket.

COTTON GROUP

The cotton products are resistant to the washing but may result in shrinkage in case of excessive washing. The painted and imprinted cottons should be washed separately in the first usage. Since cotton is a natural fiber it may lose some color after the first washing. It’s impossible to avoid this since the use of the paints which cause cancer are forbidden in the developed countries. The fruit and juice stains should be intervened by cold water before the stain penetrates deeply. The cotton clothes especially the shirts shouldn’t be ironed with high temperatures to smooth the wrinkles when they are moist. The temperature should be lowe while ironing the polyester-cotton fabrics. The clothes should be kept dry and clean.

LINEN GROUP

Check the label to know if the dry cleaning or washing is advised. The washable linens may easily be washed in the machine or by hand. White linens should be dried by sun to protect the whiteness. We advise to iron the linens while they are slightly moist. Linen fabrics need frequent iron. Those that don’t need iron are the linen fabrics with polyester. Be careful about it while washing and ironing. Silk GroupDry cleaning is advised fort he protection.Some silk products that are classified as washable should be washed delicately with liquid detergent. Be careful while washing because the water may easily cause stains in silk.They should always be ironed with an iron of low temperature without steam.Keep the clothes absolutely clean and in case of unmoved stains ask for the help of an expert.Especially the dark colored silks are sensitive to the sunlight.

MODAL (VISCOSE)

They might be washed depending on the production procedure and texture of the fabric. Iron them while they are moist at a medium temperature by the reverse. If you do the opposite then use a moist fabric. The dry fabrics should be ironed at lower temperatures.

Technical Concepts Expressing The Salvatini Quality

S CONCEPT The thickness of wool and fiber is defined as micron. 1 micron = 1/1000mm The single and double layer yarns are spun by the fibers. These yarn numbers are called Nm (metric number). The yarn quality depends on the fiber quantity and this changes according Nm. As the fiber micron becomes smaller the “s”s are rising. The 150S, 160S, 180S seen on the fabrics Express the thickness of the fiber. Hence the fiber of the 180S is thinner than the fiber of a fabric of 160S. In wool fabrics as the “S” increases the fiber become thinner and the fabric looks more slippery, bright and fine. 30 GG KNITTED